11-19-2006, 02:50 PM
I gave it another try. What you (Mix) said worked. I tried another leg with similar stability to that (one of the LW legs, I forgot the serial). Same damage.
However, I tried switching cores (while retaining the rest of the parts). The cores I used were 99UL, U3 and UA. They had similar stability at the end (I used the SS ops part). Their difference in stability was on the ones digit, so it's effect is not noticeable. But what's weird? Their damage was different. 99UL did the least, then U3, then UA did the most. The difference was very slight, but still.
My setup:
S4
99UL/U3/UA
LORIS
Lowest stability LW biped
VULTURE2
G91
ANANDA
F73H
LB2
Ops: SS, PRIMER
Wow.. Blading is more intricate than I had imagined.
However, I tried switching cores (while retaining the rest of the parts). The cores I used were 99UL, U3 and UA. They had similar stability at the end (I used the SS ops part). Their difference in stability was on the ones digit, so it's effect is not noticeable. But what's weird? Their damage was different. 99UL did the least, then U3, then UA did the most. The difference was very slight, but still.
My setup:
S4
99UL/U3/UA
LORIS
Lowest stability LW biped
VULTURE2
G91
ANANDA
F73H
LB2
Ops: SS, PRIMER
Wow.. Blading is more intricate than I had imagined.
"Numbers are not part of the real world; they're part of something else."
-Prof. Rolly Panopio, UPLB Math Division
-Prof. Rolly Panopio, UPLB Math Division
